Driver Rotation on a Sailrite Ultrafeed Sewing Machine

Driver Rotation on a Sailrite Ultrafeed Sewing Machine

In this video you’ll learn how to check and correctly set the driver rotation (sometimes called the rotational timing) of your Sailrite Ultrafeed Sewing Machine. Incorrect driver rotation can cause skipped stitches or even prevent the machine from sewing.

To watch the full & complete video series see it from the playlist at this link: https://www.youtube.com/playlist?list=PLAbM539i4biWOFtdRlX6JE0F_Y9uLPO-z

Interested in the Ultrafeed Sewing Machine? Learn more at http://www.sailrite.com/ultrafeed-portable-industrial-sewing-machines

50 Comments

  1. Robert Berry on September 7, 2021 at 10:25 pm

    My sewing machine bent a #23 needle at a 45 degree angle! I had to replace a few parts, including the needle. I still think it needs a bit more. Last problem, I bought a spool of thread for $6. It said it was polyester, V138 Sunstop … Hecho en china … Now I think my machine hates me! How do I fix my machine to like crappy, made in china, thread? I was just trying to save a few bucks!

  2. Alphonsa Maniwavie on September 7, 2021 at 10:26 pm

    Thank you this video helps me to adjust my indastrial sewing machine’s timing and pickup thread from the bobbin ..thankyou

  3. Billy Smith on September 7, 2021 at 10:26 pm

    Great video, helped me fix a home sewing machine

  4. Mymotherland🇮🇳 on September 7, 2021 at 10:30 pm

    Thank you

  5. swathi bhagavan on September 7, 2021 at 10:31 pm

    Thank u sir

  6. Amara Leigh on September 7, 2021 at 10:33 pm

    I have a singer fashion mate machine and I don’t see the screws you are talking about. The driver only comes up partially on the left when you turn knob towards you. Do you have a machine similar to mines where you can do a video for me.

  7. abay taylor on September 7, 2021 at 10:33 pm

    to adjust the timing between the needle and the rotary(shuttle hook) it does require accuracy and painstaking

  8. Chloe Boot on September 7, 2021 at 10:33 pm

    Excellent presentation. I’ve watched so many videos hook assembly (etc) and this by far outweighs them all. Thank you so much! And when you said hook, of course, my brain went into "… check out the hook while my dj revolves it…"

  9. Aleksei Spitsyn on September 7, 2021 at 10:34 pm

    Hi dears!
    Do you have a guide/video how to properly replace and tune both of Presser Bars to achieve appropriate synchronous movement of both of Presser Feet?
    Thank you!

  10. Isagani Despabiladeras on September 7, 2021 at 10:34 pm

    I have a problem with my sewing machine, the thread is not looping properly.

  11. alikemal sahin on September 7, 2021 at 10:35 pm

    This is by far one of the best videos i have seen sofar!!!!
    Absolutely great!

  12. Renuka priya on September 7, 2021 at 10:36 pm

    Too good explainatation. I understood very clearly. THANK YOU!

  13. Muktarahmad Ali Shirakol on September 7, 2021 at 10:39 pm

    I Kyi ou

  14. Alpha Romeo on September 7, 2021 at 10:43 pm

    Thenk you Very Very Match 👍👍
    You Halp Me Alot

  15. SAHID GAMIL on September 7, 2021 at 10:43 pm

    Hamara pash 100purane machine ha singers

  16. Axel Knauer on September 7, 2021 at 10:50 pm

    Thank you for Sharing, brilliant explantion !👏👌but once again plz, how wide should the screwdriver tip be ?

  17. Shades of the Orient Makeup and Beauty Consultation on September 7, 2021 at 10:51 pm

    Thanks soo much after several videos I was able to come across this one and it helped soo much it also saved me alot of money

  18. Saba Saba on September 7, 2021 at 10:52 pm

    Sir meri mission me jo niddle hai na wo bobbin se jake lag rahi hai

  19. pavlik mor on September 7, 2021 at 10:52 pm

    нехер чё важные моменты башкой заслонять… а во вторых, чё ж ты не прошил ничего, с целью демонстраціи, как она работает после юстирóвки 🤔 !?

  20. pawan yadav on September 7, 2021 at 10:52 pm

    Hello sir it’s a very nice or good informational video. but sir plz tell me allen key (scrue driver) size .

  21. Awanzada Hamid on September 7, 2021 at 10:53 pm

    Impressive way of elaboration thanx

  22. kanchana somaweera on September 7, 2021 at 10:54 pm

    Thank you

  23. ALL PRANKS on September 7, 2021 at 10:54 pm

    New technology for sewing Machines, pakistani startup,SOLASEW HAS STARTED its new journey towards sewing machines, there first product is :
    https://youtu.be/4MrKRlBU8fA

  24. Okoro helen on September 7, 2021 at 10:55 pm

    Thanks so much for this video I just subscribe please my mechanic stop morning what do I do? please

  25. Herrera Ya akov on September 7, 2021 at 10:57 pm

    just adjusting the crab sews well or something else you have to adjust because you try several and in what type of stitch is made

  26. m.r.m anas on September 7, 2021 at 10:57 pm

    How. To. Keep timing for my high-speed mechin

  27. Sharmi Banu on September 7, 2021 at 10:57 pm

    31-k swing machine deriver not working please video bro

  28. Gershon Mensah on September 7, 2021 at 10:57 pm

    Thanks I just followed your video to fix my daughters butterfly machine

  29. Luke on September 7, 2021 at 10:59 pm

    Thanks so much

  30. J Hartzell on September 7, 2021 at 10:59 pm

    I thank you. I only suggest the camera man take auto focus off so you would not have to refocus to zoom. LOL!! Was killing me!! Sorry for citic, previous career work Audio/Video before Covit destroyed our convention industry.

  31. انصاف ايمان on September 7, 2021 at 11:01 pm

    اذا كان ممكن ترجمة 👏👏👏👏👏👏

  32. Eric Van Deursen on September 7, 2021 at 11:01 pm

    This is by far one of the best videos i have seen sofar!!!!
    Absolutely great!

  33. anil sharma on September 7, 2021 at 11:02 pm

    Make a drive software for sewing machine 🛐🛐🛐🕎

  34. prakas naayak on September 7, 2021 at 11:03 pm

    Fantastic presentation real basic tip revealed thank you nice video

  35. Omprakesh Mishra on September 7, 2021 at 11:05 pm

    Hidhi ma

  36. keji M on September 7, 2021 at 11:06 pm

    hi. I recently got a new machine. It’s an hoffman machine and the instructions are all in German. I need to know how to set the stitches and all but I can’t find instructions on that particular machine online. Help pls!!!

  37. The Green Viking on September 7, 2021 at 11:06 pm

    awesome explanation. thank you for sharing

  38. Cresencio Damayo Jr. on September 7, 2021 at 11:07 pm

    Thanks to your video,big help,done adjust.god bless

  39. Betty Rice on September 7, 2021 at 11:07 pm

    My driver not moving

  40. Anokyewaa Korkor Nana Jnr on September 7, 2021 at 11:08 pm

    Really learnt a lot, thank you. I have a similar problem with the timing but with mine, the need keeps hitting the race hook and sometimes the needle end up breaking. It also makes a lit of noise, any information to help solve this problem will be much appreciated. Thanks once again

  41. Manihot Esculenta on September 7, 2021 at 11:09 pm

    Thank you. I was able to fix my sister’s sewing machine.
    Those are some quality machines Salrite produces.

  42. FERDINAND APARECE on September 7, 2021 at 11:10 pm

    ..i have dsame problem…but may sewing machine is singer 2250..which i cant find the part that you adjust.

  43. Miny on September 7, 2021 at 11:10 pm

    In janome machine when put bobin case with thread its speed go down, if no bobincase works in high speed. Why pls reply

  44. Rajan Chari on September 7, 2021 at 11:10 pm

    Nice video sir

  45. michael james on September 7, 2021 at 11:10 pm

    Hi can you help me please

  46. Ivan Rodriguez on September 7, 2021 at 11:15 pm

    Sadly I am having a problem with the LS1 model and the timing and stitch skipping and timing tried getting help two days in a row, when you call you will be told someone will email you. They email screen shots are of clif notes of the videos I will sadly be returning it buyers beware. 1500.00. As a business owner. I don’t make it a point of trolling businesses I am trying to build relationships with on the internet but I feel it would be nice to have a phone conversation with someone who can could have helped.

  47. md. murad on September 7, 2021 at 11:16 pm

    My bobbin case stuck in machine
    So plz help how can I fix it

  48. Eva Hudakova on September 7, 2021 at 11:17 pm

    Thank you, but while sewing, my sewing machine suddenly makes quite a noise and it seems like the thread is somewhere down caught and then released and the thread is knotty at one place and then it works again. It happens from time to time during sewing.

  49. Amara Leigh on September 7, 2021 at 11:18 pm

    Do you know how to fix a Singer fashion mate 6160? I need my driver adjusted and there is no repair shop in my area

  50. Poonam Singh on September 7, 2021 at 11:20 pm

    Dear sir same problem is my machine usha jonome. stetch is not complete in my machine

Leave a Comment