9 Comments

  1. icarus901 on September 13, 2021 at 11:13 pm

    Request: video summarizing all of the software, open source projects, etc that you’re employing.

    And did you say you say you dropped grafana? or just supplement it with the display shown on the tablet/touchscreen?

  2. RV10flyer on September 13, 2021 at 11:16 pm

    Measure on the red 120V leg going into the contactor, to see if that is any different. That is going to “C” or common on your compressor. I wish you had my Fluke that measures “Inrush”. What model did you purchase and from where? My eyes aren’t good enough to see the checked line on the unit. Starting my 20.6 kw pv system soon. It’s been a busy summer at work. Finally up to 80.6 kWh of LFE 280 aH in stock. Looking good down there near our last place…where you are making similar power as we will be, on 20% less panels.

  3. Bobby's Solar Homestead on September 13, 2021 at 11:17 pm

    I need to get going on home assistant. Thanks for sharing brother. Looking good. God Bless

  4. Marco A. Rosado on September 13, 2021 at 11:30 pm

    Glad to see your great videos again, your friend on PR.

  5. Off Grid by Design on September 13, 2021 at 11:31 pm

    Outstanding as usual… Nothing can be more comforting than self sufficiency…

  6. mr outback on September 13, 2021 at 11:33 pm

    very cool

  7. OffGrid Wanabe on September 13, 2021 at 11:33 pm

    Awesome, it is hard to improve on perfection Happy solaring.

  8. clpoelker on September 13, 2021 at 11:43 pm

    Thanks for taking the time today for the upload! Looking forward to thr LV6548 review. I have been running 2 now for a few months, and so far so good. About to add another 14KW of battery, and have ordered a couple Seplos BMS’s and batteries. Hoping I can get the CAN Pylontech protocol to work with the BMS and MPP LV’s for direct SOC to the inverters.

  9. jwsolarusa on September 13, 2021 at 11:52 pm

    Awesome update brother, thanks for sharing and God bless

Leave a Comment